High Definition Subwoofer
Better wire, better construction and better connectors! DiMarzio® High Definition™ Interconnect Cables are constructed from 240 strands of FEP Fluoropolymer-insulated OFHC wire. OFHC copper transmits full-range audio frequency signals better at lower resistances. FEP Fluoropolymer insulation is used because it is more effective at preventing interaction between conductors in the cable. The 16 AWG wires are silver soldered to high-quality gold-plated locking RCA connectors. Our cable has one 16-gauge for the plus and one 16-gauge for the minus. Independent foil shields for the negative and positive sides of the cable prevent noise interaction between the signal paths. The shield ground is connected on the "send" side to keep the sound open while preventing noise interaction between system components. Cables are also available with gold plated Neutrik XLR connectors at an extra charge.*All DiMarzio® cables feature a Lifetime Warranty. Made in the USA
Specs
Wire Gauge: AWG 16 x 2 OFHC with Dacron Center Core (1.32 mm2) AWG 22 drain (.325 mm2)Diameter: 0.35 in. (8.89 mm)
Insulation: FEP Fluoropolymer
Capacitance: 71 pF/ft (233 pF/M) balanced or single-ended
Shield & Material: Two independently 100% foil shielded balanced line conductors
Jacket & Material: PVC + Nylon Overbraid
Resistance: 4.4 ohm/1,000 ft (14.4 ohm/KM)
Inductance: 0.1 µH/ft (0.3 µH/M)
Termination Method: Silver Solder
Color Options
